Good quality Soft LED Strip Light
Soft LED Strip light you can cut and splice, High efficiency 150Lm / W constant voltage drive, Ideal for Light source, Backlighting for advertising,Slim light box, Kitchen, living room, Blister words backlit, LED signs Do your own. energy-saving lighting project.
1. It can be cut .
2. Slim light box LED sheet module, depth 30mm
3. High efficiency 108Lm / W DC24V Input
4. High CRI > 80 (Optional: > 90)
5. Size 495mm , LED spacing 20mm,LED QTY 42pcs
6. input Voltage DC24V(Optional: 12V), Easy to expand installation
7. Warranty 3 years 8. CE RoHS FCC PSE
Datasheet of Flexible LED Strip
|Product name||Model||LED Size||LED QTY|
|Good quality Soft LED Strip Light||HE1017A||SMD2835||42 PCS|
|Specification||Lumen||Color Temp||Viewing angle|
Safety Information 1. The LED panel itself and all its components may not be mechanically stressed.
2. Assembly must not damage or destroy conducting paths on the circuit board.
3. Installation of LED lamp (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.
4. Correct electrical polarity needs to be observed. Wrong polarity may destroy the LED panel.
5. Parallel connection is highly recommended as safe electrical operation mode.
6. Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the LED panel.
7. Please ensure that the power supply of adapters power to operate the total load.
8. When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface.
9. Pay attention to standard ESD precautions when installing the LED panel.
10. Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
11. Waterproof LED panel , please note waterproof wiring department
12. LED panel can’t be used as support, you need fixed in the frame, fixed to the wall, otherwise, may cause deformatio